Gaggenau RF410304, User Manual

14

en

       Operating the appliance

Dimming when door is opened and 
closed

If dimming is switched on, the light will slowly become 
brighter when the door is opened, and then slowly 
darker when it is closed.

Switching dimming on or off when opening and 
closing the door

1

Press 

à

 button to open the main menu.

2

Press 

B

 button to move to the menu item 

Basic 

settings

.

3

Press 

™

 button.

4

Press 

C

 button to move to the menu item 

Dimming 

when opening and closing the door

.

5

Press 

%

 button.

6

Press 

C

 button to move to the menu item 

On

 or 

Off

.Press 

™

 button to confirm.

Setting the temperature unit

You can choose between the unit °C and °F.

1

Press 

à

 button to open the main menu.

2

Press 

B

 button to move to the menu item 

Basic 

settings

.

3

Press 

™

 button.

4

Press 

B

 button to move to the menu 

item 

Temperature unit

.

5

Press 

%

 button.

6

Press 

B

C

 buttons to move to the required unit.

7

Press 

™

 button.

The unit will be changed.

8

Press 

'

 button to exit the menu.

Setting the language

1

Press 

à

 button to open the main menu.

2

Press 

B

 button to move to the menu item 

Basic 

settings

.

3

Press 

™

 button.

4

Press 

B

 button to move to the menu item 

Language

.

5

Press 

%

 button.

6

Press 

B

C

 buttons to move to the required 

language.

7

Press 

™

 button.

The display restarts, and the start screen is 
displayed.

Resetting to factory settings

1

Press 

à

 button to open the main menu.

2

Press 

B

 button to move to the menu item 

Basic 

settings

.

3

Press 

™

 button.

4

Press 

B

 button to move to the menu item 

Factory 

settings

.

5

Press 

%

 button.

A signal tone sounds and a message to confirm 
reset appears.

6

Press 

™

 button.

All settings are reset to the factory settings.

7

Press 

'

 button to exit the menu.

Switching demo mode on or off

The cooling function of the appliance is switched off. All 
other functions can be used.

Note: 

Do not store any food in demo mode as the 

appliance remains at room temperature.

1

Press 

à

 button to open the main menu.

2

Press 

B

 button to move to the menu item 

Basic 

settings

.

3

Press 

™

 button.

4

Press 

B

 button to move to the menu item 

Demo 

mode

.

5

Press 

%

 button.

6

Press 

B

C

 buttons to select the setting 

On

 or 

Off

.

7

Press 

™

 button.

The setting is saved.

8

Press 

'

 button to exit the menu.

Rest mode

The appliance switches off the following:

▯

Automatic door opening

Note: 

With handle-free installation, please note that 

you will not be supported when opening the door 
during this time. 
To open the door in this case, reach from below 
under the bottom panel of the unit.

▯

Audible signals

▯

Interior lighting

▯

Messages on the control panel

▯

Background illumination of control panel is reduced