6
en
Installation and connection
5
Installation and connection
Installation and connection
Scope of supply
After unpacking all parts, check for any damage in
transit.
If you have any complaints, contact the dealer from
whom you purchased the appliance or our Customer
Service.
The delivery consists of the following parts:
▯
Built-in appliance
▯
Interior fittings (depending on model)
▯
Installation material
▯
User manual
▯
Installation instructions
▯
Customer service booklet
▯
Warranty enclosure
▯
Information on the energy consumption and noises
Technical specifications
Refrigerant, cubic capacity and further technical
specifications can be found on the rating plate.
"Getting to know your appliance" on page 9
Installing the appliance
Installation location
The more refrigerant an appliance contains, the larger
the room must be in which the appliance is situated. In
rooms which are too small leaking refrigerant can form a
flammable gas-air mixture.
Per 8 g of refrigerant the room must be at least 1 m³ in
size. The amount of refrigerant in your appliance is
indicated on the rating plate inside the appliance.
"Getting to know your appliance" on page 9
The weight of the appliance may be up to 460 kg
depending on the model.
Permitted room temperature
The permitted room temperature depends on the climate
class of the appliance.
Information on the climate class can be found on the
rating plate.
"Getting to know your appliance" on page 9
The appliance is fully functional within the permitted
room temperature.
If an appliance with climate class SN is operated at
colder room temperatures, the appliance will not be
damaged up to a room temperature of +5°C.
Built-in cut-out
The cut-out must fulfil these criteria:
▯
Anti-tilt bracket fitted
▯
Cut-out depth min. 610 mm, for flush installation
635 mm
▯
Rectangular
▯
Sturdy – the side panels and the top must be min.
16 mm thick and securely attached to the floor or
wall
▯
Depth of shortened side panels: min. 100 mm
Side-by-side installation
Observe the specifications in the installation
instructions for a side-by-side installation.
If a partition wall is required between the appliances, it
must be at least 16 mm wide.
Climate class
Permitted room temperature
SN
+10°C ... 32°C
N
+16°C ... 32°C
ST
+16°C ... 38°C
T
+16°C ... 43°C
Summary of Contents for RF410304
Page 1: ...en User manual RF410304 Freezer...
Page 26: ...8001170885 8001170885 9912 en...