18
en-us
Operating the appliance
Switching the water filter counter on
and off
If you have replaced the water filter with a particle filter,
switch the water filter counter off. It is not needed in this
case as the particle filter does not have to be replaced.
1.
Press
à
button to open the main menu.
2.
Press
B
button to move to the
Basic settings
menu.
3.
Press
™
button.
4.
Press
C
button to move to the menu item
Water filter
counter
.
5.
To change the setting, press
%
button.
6.
Confirm the selection by pressing
™
button.
Dimming when door is opened and
closed
If dimming is switched on, the light will slowly become
brighter when the door is opened, and then slowly darker
when it is closed.
Switching dimming on or off when opening and closing
the door
1.
Press
à
button to open the main menu.
2.
Press
B
button to move to the menu item
Basic
settings
.
3.
Press
™
button.
4.
Press
C
button to move to the menu item
Dimming
when door is opened and closed
.
5.
Press
%
button.
6.
Press
C
button to move to the menu item
On
or
Off
.Confirm by pressing
™
button.
Setting the temperature unit
You can choose between the unit °C and °F.
1.
Press
à
button to open the main menu.
2.
Press
B
button to move to the menu item
Basic
settings
.
3.
Press
™
button.
4.
Press
B
button to move to the menu item
Temperature
unit
.
5.
Press
%
button.
6.
Press
B
C
buttons to move to the required unit.
7.
Press
™
button.
The unit will be changed.
8.
Press
'
button to exit the menu.
Setting the language
1.
Press
à
button to open the main menu.
2.
Press
B
button to move to the menu item
Basic
settings
.
3.
Press
™
button.
4.
Press
B
button to move to the menu item
Language
.
5.
Press
%
button.
6.
Press
B
C
buttons to move to the required language.
7.
Press
™
button.
The display restarts, and the start screen is displayed.
Resetting to the factory settings
1.
Press
à
button to open the main menu.
2.
Press
B
button to move to the menu item
Basic
settings
.
3.
Press
™
button.
4.
Press
B
button to move to the menu item
Factory
settings
.
5.
Press
%
button.
A signal tone sounds, and a message to confirm reset
appears.
6.
Press
™
button.
All settings are reset to the factory settings.
7.
Press
'
button to exit the menu.
Switching demo mode on or off
The cooling function of the appliance is switched off. All
other functions can be used.
Note:
Do not store any food items in demo mode as the
appliance remains at room temperature.
1.
Press
à
button to open the main menu.
2.
Press
B
button to move to the menu item
Basic
settings
.
3.
Press
™
button.
4.
Press
B
button to move to the menu item
Demo mode
.
5.
Press
%
button.
6.
Press
B
C
buttons to select the setting
On
or
Off
.
7.
Press
™
button.
The setting is saved.
8.
Press
'
button to exit the menu.
