20
en-us
Operating the appliance
Rest mode
The appliance switches off the following:
▯
Automatic door opening
Note:
With handle-free installation, please note that
you will not be supported when opening the door
during this time. To open the door in this case, reach
from below under the bottom panel of the unit.
▯
Ice maker
▯
Audible signals
▯
Interior light
▯
Messages on the display
▯
Background illumination of display is reduced
Switching Rest mode on or off
Displaying or hiding rest mode in the main menu
To use rest mode, you first have to display the function in
the main menu:
1.
Press
à
button to open the main menu.
2.
Press
B
button to move to the menu item
Basic
settings
.
3.
Press
™
button.
4.
Press
B
button to move to the menu item
Rest mode
.
Press
%
button.
5.
Press
C
buttons to move to the menu item
Available
or
Not available
. Confirm by pressing
™
button.
6.
Press
'
button to exit the menu.
The function is displayed or hidden in the main menu.
Switching rest mode on
1.
Press
à
button to open the main menu.
2.
Press
/
button to open the view
Rest mode duration
.
3.
Press
A
/
@
buttons to change the duration.
4.
Press
I
button to start.
The appliance switches all listed functions off.
Switching rest mode off
▯
After the selected time elapses, the appliance
switches over to normal operation.
▯
To end rest mode before expiry of the selected time,
press
&
button.
Automatic door opening
The automatic door opening function supports you in
opening the door.
As soon as you activate this function, automatic door
opening moves out and supports you in opening the door.
9
CAUTION
Repeatedly closing the door too early will cause
automatic door opening to wear out or fail.
Do not close the door as long as automatic door
opening is still moved out.
If you have nevertheless closed the door, leave it
closed for 5 minutes. Automatic door opening will
re-adjust itself.
Open the menu item Automatic door opening:
1.
Press
à
button to open the main menu.
2.
Press
B
button to move to the
Basic settings
menu.
3.
Press
™
button to open the menu.
4.
Press
B
button to move to the menu item
Automatic
door opening
.
5.
To change the setting, press
%
button.
Switching on Push-to-open system
In an installation situation without handles you can select
the Push-to-open system. Your appliance will then open a
crack if you press lightly on the door.
Note:
Please note that automatic door opening is
disabled if Rest mode is activated.
1.
Open the menu item
Automatic door opening
.
2.
Select menu item
Push-to-open system
.
3.
Press
™
button to open the menu item.
4.
Select
Opening force
.Here you can select the level of
force required to activate automatic door opening.
5.
Select
Opening duration
.Here you can select how long
the door should remain open a crack before it closes
again automatically.
Note:
If the door only remains open a crack, the
appliance checks once a second whether the door is
still ajar.After the selected opening duration elapses,
the appliance will close the door automatically.
Switching on Pull-to-open system
In an installation situation with handles you can select the
Pull-to-open system. Your appliance will support you in
opening the door as soon as you pull on the handle.
1.
Open the menu item
Automatic door opening
.
2.
Select menu item
Pull-to-open system
.
3.
Press
™
button to open the menu item.
4.
Select
Opening force
.Here you can select the level of
force required to activate automatic door opening.
Switching off automatic door opening
1.
Open the menu item
Automatic door opening
.
2.
Select menu item
Off
.
