Home Connect
en
19
1.
Open the Home Connect app and
scan the following QR code.
2.
Follow the instructions in the
Home Connect app.
10.3 Installing updates for the
Home Connect software
The appliance searches for updates
to the Home Connect software at reg-
ular intervals.
Note:
If updates are available, the
temperature display shows
.
To reset the update and the temper-
ature display to the set temperature,
press any touch field.
1.
Press .
a
The temperature display shows
.
2.
Press repeatedly until the tem-
perature display shows
.
3.
Press .
a
The temperature display shows an
animation.
a
The update is installed.
a
The control panel is locked during
the installation.
a
If the installation is successful, the
temperature display shows
.
4.
If the temperature display shows
, the appliance was unable to in-
stall the update.
‒
Repeat the process at a later
point.
5.
If the update cannot be completed
after several attempts, contact cus-
tomer service →
10.4 Resetting Home Connect
settings
If your appliance experiences con-
nection problems with the WLAN
home network (Wi-Fi) or your appli-
ance wants to log into a different
WLAN home network (Wi-Fi), you can
reset the Home Connect settings.
1.
Press .
a
The temperature display shows
.
2.
Press repeatedly until the tem-
perature display shows .
3.
Press .
a
The temperature display shows an
animation for 15 seconds.
a
The temperature display shows
.
a
The Home Connect settings have
been reset.
10.5 Data protection
Please see the information on data
protection.
The first time your appliance is
registered on a home network
connected to the Internet, your
appliance will transmit the following
types of data to the Home Connect
server (initial registration):
¡
Unique appliance identification
(consisting of appliance codes as
well as the MAC address of the
Wi-Fi communication module in-
stalled).
¡
Security certificate of the Wi-Fi
communication module (to ensure
a secure data connection).
¡
The current software and hardware
version of your appliance.
¡
Status of any previous reset to
factory settings.
This initial registration prepares the
Home Connect functions for use and
is only required when you want to
use the Home Connect functions for
the first time.
