en
Home Connect
18
1.
Press .
a
The temperature display shows
.
2.
Press repeatedly until the tem-
perature display shows
.
3.
Press .
a
The appliance now sets up its own
WLAN network with the network
name "HomeConnect".
a
The temperature display shows an
animation. The appliance is ready
for manual connection to the
WLAN home network (WiFi).
4.
Follow the instructions in the
Home Connect app on the mobile
device.
a
The network information for the
WLAN home network (Wi-Fi) is
transferred to the appliance.
a
Once successfully connected,
flashes in the temperature display.
5.
If the temperature display shows
, the appliance was unable to es-
tablish a connection to the WLAN
home network (WiFi).
‒
Check whether the appliance is
located within the range of the
WLAN home network (Wi-Fi).
‒
Repeat the process.
10.3 Connecting the appli-
ance to the Home Con-
nect app
If you have automatically connected
your appliance to your WLAN home
network (Wi-Fi), you can connect
your appliance to the Home Connect
app.
Requirements
¡
The appliance is connected to the
WLAN home network (Wi-Fi).
→
¡
The Home Connect app has been
installed on your mobile device.
1.
Press .
a
The temperature display shows
.
2.
Press repeatedly until the tem-
perature display shows
.
3.
Press .
a
The temperature display shows an
animation.
4.
Follow the instructions in the
Home Connect app until the pro-
cess is complete.
a
Once successfully connected, the
temperature display shows
.
5.
If the temperature display shows
, the appliance was able to es-
tablish a connection to the
Home Connect app.
‒
In the Home Connect app,
check whether the mobile
device is connected to the
WLAN home network (Wi-Fi).
‒
Repeat the process.
6.
If the temperature display shows
10.4 Installing updates for the
Home Connect software
The appliance searches for updates
to the Home Connect software at reg-
ular intervals.
Note:
If updates are available, the
temperature display shows
.
To reset the update and the temper-
ature display to the set temperature,
press any touch field.
1.
Press .
a
The temperature display shows
.
2.
Press repeatedly until the tem-
perature display shows
.
3.
Press .
a
The temperature display shows an
animation.
a
The update is installed.
