en
Home Connect
20
¡
Connecting appliance to WLAN
home network (Wi-Fi) without WPS
function →
The Home Connect app guides you
through the entire login process. Fol-
low the instructions in the Home Con-
nect app to configure the settings.
Tips
¡
Please consult the documents sup-
plied by Home Connect.
¡
Please also follow the instructions
in the Home Connect app.
Notes
¡
Please note the safety precautions
in this instruction manual and
make sure that they are also ob-
served when operating the appli-
ance via the Home Connect app.
→
¡
Operating the appliance on the ap-
pliance itself always takes priority.
During this time it is not possible
to operate the appliance using the
Home Connect app.
Connecting the appliance to a
WLAN home network (Wi-Fi)
with WPS function
If your router has a WPS function,
you can connect the appliance to
your WLAN home network (Wi-Fi)
automatically.
1.
Press .
a
The temperature display shows
.
2.
Press repeatedly until the tem-
perature display shows .
3.
Press .
a
The temperature display shows an
animation for two minutes. The ap-
pliance is ready for automatic con-
nection to the WLAN home net-
work (WiFi).
4.
Activate the WPS function on the
router during this period.
To do this, take note of the inform-
ation in the documents for your
router.
a
Once successfully connected,
flashes in the temperature display.
5.
If the temperature display shows
, the appliance was unable to es-
tablish a connection to the WLAN
home network (WiFi).
‒
Check whether the appliance is
located within the range of the
WLAN home network (Wi-Fi).
‒
Repeat the process or establish
the connection manually
→
6.
Connect the appliance to the
Home Connect app. →
Connecting the appliance to a
WLAN home network (Wi-Fi)
without WPS function
If your router does not have a WPS
function, you can connect the appli-
ance to your WLAN home network
(Wi-Fi) manually. The appliance
briefly sets up its own WLAN net-
work. You can connect a mobile
device to the WLAN network and
transfer the network information for
the WLAN home network (Wi-Fi) to
your appliance.
Requirement:
The Home Con-
nect app has been installed on your
mobile device.
1.
Press .
a
The temperature display shows
.
2.
Press repeatedly until the tem-
perature display shows
.
3.
Press .
a
The appliance now sets up its own
WLAN network with the network
name "HomeConnect".