Alarm
en
17
Note:
After approx. 36 hours, the ap-
pliance switches to normal operation.
Switching off Fast function
▶
Press .
a
The previously set temperature is
displayed.
Alarm
9 Alarm
Alarm
9.1 Door alarm
If the appliance door is open for a
while, the door alarm switches on.
A warning tone sounds.
Switching off the door alarm
▶
Close the appliance door or press
.
a
The warning tone is switched off.
Home Connect
10 Home Connect
Home Connect
This appliance is network-capable.
Connect your appliance to a mobile
device to control its functions via the
Home Connect app.
The Home Connect services are not
available in every country. The avail-
ability of the Home Connect function
depends on the availability of
Home Connect services in your coun-
try. You can find information about
this at: www.home-connect.com.
To be able to use Home Connect,
you must first set up the connection
to the WLAN home network (Wi-Fi
1
)
and to the Home Connect app.
After switching on the appliance, wait
at least 2 minutes until internal
device initialisation is complete. Only
then should you set up Home Con-
nect.
The Home Connect app guides you
through the entire login process. Fol-
low the instructions in the Home Con-
nect app to configure the settings.
Tips
¡
Please consult the documents sup-
plied by Home Connect.
¡
Please also follow the instructions
in the Home Connect app.
Notes
¡
Please note the safety precautions
in this instruction manual and
make sure that they are also ob-
served when operating the appli-
ance via the Home Connect app.
→
¡
Operating the appliance on the ap-
pliance itself always takes priority.
During this time it is not possible
to operate the appliance using the
Home Connect app.
10.1 Setting up Home Con-
nect
Requirement:
The Home Con-
nect app has been installed on your
mobile device.
1.
Scan the QR code using the
Home Connect app.
2.
Follow the instructions in the
Home Connect app.
1
Wi-Fi is a registered trademark of the Wi-Fi Alliance.
