21
Control panel
1
Main On/Off switch
Switches the whole appliance on and off.
2
Temperature selection buttons
The selected temperature is set with the
Æ
and
Ç
buttons.
First use the selector switches for the lower chilling
zone
4
or the upper chilling zone
5
to select the chilling
zone which is to be set.
3
Temperature display
Set temperature is displayed:
Upper temperature display:
Temperature display in the upper cooling zone
Lower temperature display:
Temperature display in the lower temperature zone
4
Lower refrigeration zone:
Press button -
†“£ ƒ
is indicated on the display.
Note:
The refrigerator compartment temperature can be set
from +5 °C to +22 °C.
The lower area of the cabinet cannot be set warmer than
the upper area.
5
Upper refrigeration zone:
Press button -
†“£ ‚
is indicated on the display.
Note:
The refrigerator compartment temperature can be set
from +8 °C to +22 °C.
The upper area of the refrigerator cannot be set colder
than the lower area.
6
Light switch
Installing the appliance
Install the appliance in a dry, well ventilated room. The
installation location should neither be exposed to direct
sunlight nor near a heat source, e.g. a cooker, radiator, etc. If
installation next to a heat source is unavoidable, use
a suitable insulating plate or observe the following minimum
distances to a heat source:
3 cm to electric or gas cookers.
30 cm to an oil or solid‐fuel cooker.
Summary of Contents for RW 262
Page 8: ...8 Türanschlag wechseln falls erforderlich Montage in der Reihenfolge der Zahlen ...
Page 22: ...22 Changing over the door hinges if required Installation in numerical sequence ...
Page 51: ...51 Reversibilità della porta se necessario Passi di lavoro nell ordine numerico ...
Page 65: ...65 Verwisselen van de deurophanging indien nodig Montage in de volgorde van de cijfers ...
