Preparing the cabinet
The appliance is installed in a base cabinet with a
width of more than 900 mm.
• Cut out the recess for the hob in your worktop.
Proceed as indicated on the installation sketch.
• As shown in the installation sketch, drill the
Ø 35 mm holes to secure the control knobs in the
cabinet front.
• If the cabinet front is thicker than 26 mm, the front
must be routed from the back to max. 26 mm on
an area of 75 x 450 mm.
15
180
min.
105
90
35
60
270
68,2
58,2
418
365,6
min. 60
800
520
490
±
2,5
780
±
2,5
min. 3
0
46
min. 5
0
3