27
Home Connect
en-us
▯
If the appliance was not able to establish a connection
to the home network, the illuminated ring on the
control knob lights up red. Start the connection
process again.
Overview of the Home Connect settings
menu
▯
Manually logging in to the home network (Wi-Fi): To
log in to the home network (Wi-Fi) manually, you
require the network name (SSID) and password (key)
for your home network.
▯
Log in to the home network (Wi-Fi) with a WPS-
enabled router.
network automatically (WPS)" on page 28
▯
Direct connection to a compatible extractor hood.
"Connecting appliances directly" on page 32
▯
Switch Wi-Fi off and on, e.g. while on holiday.
"Switch the wireless network connection
(LAN or WLAN) on or off" on page 29
▯
Reset the Home Connect connections, e.g. for a new
router, changing to a new Internet service provider.
"Resetting the Home Connect connections"
Connecting the appliance to your home
network (Wi-Fi)
1.
Carry out the following operating steps one after the
other without interruption.
2.
Open the Home Connect settings menu.
or close the Home Connect settings menu"
on page 26
The illuminated ring around the control knob lights up
blue.
Manual Registration in the Home
Network
Note:
To log in to the home network (Wi-Fi) manually,
you require the network name (SSID) and password (key)
for your home network.
1.
Turn the control knob clockwise to position
ª
or
¹
.
After around five seconds, the illuminated ring around
the control knob flashes blue and yellow alternately.
’‹¯ ƒ
is displayed on the control panel.
The appliance is now in manual mode.
W
PLQ
66,'
3DVVZRUG
W
PLQ
:36
W
V
W
V
W
V
Summary of Contents for Vario flex 400 Series
Page 1: ... DJJHQDX Use and care manual VI 422 613 Cooktop ...
Page 2: ...2 9 ...