28
en-us
Home Connect
2.
Switch to the general settings menu of your mobile
device and call up the Wi-Fi settings.
On your mobile device, the "HomeConnect" Wi-Fi
connection is available for around 20 minutes.
3.
Connect to the "HomeConnect" Wi-Fi connection
(password: "HomeConnect").
4.
Launch the Home Connect app on your mobile device
and follow the instructions for network login. Enter the
password (key) of the home network. Following
successful connection to the router, the illuminated
ring around the control knob lights up green for
around three seconds.
˜‘‚
and
Ö
are displayed on
the control panel.
5.
The illuminated ring around the control knob flashes
blue and white alternately. The connection to the
mobile device is being established.
The appliance is available in the app on the mobile
device once the illuminated ring around the control
knob lights up green. If the illuminated ring around the
control knob lights up red, it was not possible to
establish a connection.
6.
To save the connection, exit the Home Connect
settings menu.
Connect settings menu" on page 26
Connection to the router unsuccessful
1.
If a connection could not be established, check the
router and turn the control knob to another position
and then back to position
ª
or
¹
.
The illuminated ring around the control knob lights up
blue. After around five seconds, the illuminated ring
around the control knob flashes blue and yellow.
’‹¯ƒ
is displayed on the control panel.
2.
Switch to the general settings menu of your mobile
device and start the Wi-Fi connection again.
3.
Check that the password has been entered correctly.
Connection to the mobile device unsuccessful
1.
If a connection could not be established, turn the
control knob to another position and then back to
position
ª
or
¹
.
The illuminated ring around the control knob lights up
blue. After around five seconds, the illuminated ring
around the control knob flashes blue and white.
˜‘‚
is displayed on the control panel.
2.
Launch the Home Connect app on your mobile device
and follow the instructions for automatic network
login.
Connecting more mobile devices to the same Home
Connect account
In the Home Connect app, you can connect more mobile
devices to your appliance.
Connecting more mobile devices to another Home
Connect account
Prerequisite: A mobile device is connected to the
appliance. The appliance can be found in the Home
Connect settings menu.
1.
Turn the control knob to another position and then
back to position
ª
or
¹
.
The illuminated ring around the control knob flashes
blue and white.
˜‘‚
is displayed on the control panel.
The appliance is now ready to connect to another
mobile device.
2.
Launch the Home Connect app on your mobile device
and follow the instructions for automatic network
login.
The appliance is available in the app on the mobile
device once the illuminated ring around the control
knob lights up green.
Logging in to your home network
automatically (WPS)
You require a router that has WPS functionality. You will
find information about this in the manual for your router.
You need to be able to access your router.
If this is not the case, follow the steps in
Registration in the Home Network" on page 27
.
1.
Push in the control knob and turn it to position
1
.
During the connection process, the illuminated ring
around the control knob flashes blue and yellow
alternately.
’‹¯‚
is displayed on the control panel.
2.
Press the WPS button on the router within the next
two minutes.
Following successful connection to the router, the
illuminated ring around the control knob lights up
green for around three seconds. The illuminated ring
around the control knob then flashes blue and white
alternately.
˜‘‚
is displayed on the control panel.
The appliance is now ready to connect to your mobile
device.
3.
Launch the Home Connect app on your mobile device
and follow the instructions for automatic network
login.
The appliance is available in the app on the mobile
device once the illuminated ring around the control
knob lights up green.
Ö
is displayed on the control
panel. If the illuminated ring around the control knob
lights up red, it was not possible to establish a
connection.
4.
To save the connection, exit the Home Connect
settings menu.
Summary of Contents for Vario flex 400 Series
Page 1: ... DJJHQDX Use and care manual VI 422 613 Cooktop ...
Page 2: ...2 9 ...
