29
Home Connect
en-us
Connection to the router unsuccessful
1.
If a connection could not be established, check the
router, and turn the control knob to another position
and then back to position
1
.
The illuminated ring around the control knob lights up
blue. After around five seconds, the illuminated ring
around the control knob flashes blue and yellow.
’‹¯‚
is displayed on the control panel.
2.
Switch to the general settings menu of your mobile
device and start the Wi-Fi connection again.
Connection to the mobile device unsuccessful
1.
If a connection could not be established, turn the
control knob to another position and then back to
position
1
.
The illuminated ring around the control knob lights up
blue. After around five seconds, the illuminated ring
around the control knob flashes blue and white.
˜‘‚
is displayed on the control panel.
2.
Launch the Home Connect app on your mobile device
and follow the instructions for automatic network
login.
Connecting more mobile devices to the same Home
Connect account
In the Home Connect app, you can connect more mobile
devices to your appliance.
Connecting more mobile devices to another Home
Connect account
Prerequisite: A mobile device is connected to the
appliance. The appliance can be found in the Home
Connect settings menu.
1.
Turn the control knob to another position and then
back to position
1
.
The illuminated ring around the control knob flashes
blue and white.
’‹¯‚
is displayed on the control
panel. The appliance is now ready to connect to
another mobile device.
2.
Launch the Home Connect app on your mobile device
and follow the instructions for automatic network
login.
The appliance is available in the app on the mobile
device once the illuminated ring around the control
knob lights up green.
Exiting the Home Connect settings
menu
1.
Carry out the following operating steps one after the
other without interruption.
2.
Close the Home Connect settings menu.
or close the Home Connect settings menu"
on page 26
The illuminated ring on the control knob goes out.
Switch the wireless network connection
(LAN or WLAN) on or off
You can switch off the Wi-Fi on your hob at any time (e.g.
to save energy during a holiday). The connections to the
home network and to the extractor hood remain saved.
When you switch the Wi-Fi back on, the saved
connections are applied.
1.
Carry out the following operating steps one after the
other without interruption.
2.
Open the Home Connect settings menu.
or close the Home Connect settings menu"
on page 26
The illuminated ring around the control knob lights up
blue.
3.
Turn the control knob clockwise to position
3
. The
illuminated ring around the control knob lights up
green.
After around five seconds, the illuminated ring around
the control knob flashes blue. After a few seconds,
the illuminated ring around the control knob lights up
blue. The
Ö
and
óò
‚
”‚
symbols on the control panel
go out. Wi-Fi is deactivated.
4.
Close the Home Connect settings menu.
or close the Home Connect settings menu"
on page 26
The illuminated ring on the control knob goes out.
If you want to switch the Wi-Fi back on, run through the
same operating sequence. The illuminated ring around
the control knob lights up blue. After around
five seconds, the illuminated ring around the control
knob flashes blue and then lights up green.
Ö
and
óò
‚
”‚
light up on the control panel.
Note:
If the hob is connected directly to a extractor hood,
the Wi-Fi cannot be switched off.
Summary of Contents for Vario flex 400 Series
Page 1: ... DJJHQDX Use and care manual VI 422 613 Cooktop ...
Page 2: ...2 9 ...
