4
Before You Begin
Tools and Parts Needed
▯
Phillips Head Screwdriver
▯
Pencil
▯
Drill with ¼" (6 mm) bit
▯
Jigsaw
▯
Tape Measure
Note:
Additional materials may be necessary for
installation in solid sur face countertops. Contact the
counter top manufacturer.
Parts Included
Cabinet Requirements
The distance from the top of the cooktop to the
bottom of cabinets above can be reduced to 24" when
the bottom of the wood or metal cabinet is protected
by not less than ¼" (6.35 mm)-thick flame-retardant
millboard covered with not less than No. 28 MSG
sheet metal, 0.015 inch (0.4 mm) stainless steel,
0.024 inch (0.6 mm) aluminium or copper.
Countertop Requirements
,
WARNING:
To reduce the risk of ignition of
surrounding combustible materials, install at
least 1" (25 mm) from both sidewalls and at
least 2" (50 mm) from the rear wall.
The countertop must be level and horizontal. The
stability of the countertop must be maintained after
the cut-out has been made.
[
¡
PP
¡
PP
PLQµPP
PLQµ
PP
PLQµ
PP
µ
PP
µ
PP
µ
PP
PLQµPP
Summary of Contents for VE 260 614
