Installing the Cooker
Please note:
If you want to convert the appliance
to a different type of gas, change the nozzles
before installing the appliance (see pages 28 - 29).
• Before installation, remove all styrofoam
packaging from the control knob and peel off
the protective film.
• Hold the support plate from the rear against the
cabinet front, insert control knob into the hole,
secure from the rear with the nut. Secure the
support plate additionally with the supplied wood
screw to prevent turning.
• Undo trough securing nuts and carefully detach
the trough.
Note:
if a flexible gas connection is being used,
you can connect the appliance before installing it
into the worktop.
• Turn the clamping screws to the side. Insert the
hob with the Gaggenau logo on the front into the
cut-out and align it.
Note:
do not stick the hob onto the worktop with
silicone.
• Turn the clamping screws under the countertop
and tighten them evenly. Do not tighten the
clamping screws too tightly, as a uniform sealing
gap should be left all round.
• Connect the appliance to the gas supply.
• Check the installation for gas leaks.
25
Summary of Contents for VG 411 CA
Page 1: ...Operation Maintenance and Installation Manual VG 411 CA Gas Cooker...
Page 2: ......
Page 29: ...27...
