7
Familiarising yourself with your appliance
en
Familiarising yourself with your
appliance
Familiarising yourself with your appliance
Gas hob
Control knob
The markings show the position of the corresponding
burner and the setting between level 1 to 12 or
simmering
Â
.
Visual signals of the luminous disc
The control knob is encircled by an illuminated ring that
indicates a number of statuses and functions.
Individual parts of the burners
Ensure that the individual parts of the burners are fitted
in the correct position and are straight; otherwise, this
may result in ignition problems or problems during
operation.
Fit the burner head and the burner ring in such a way
that the latches on the lower section of the burner click
into place in the corresponding slots. The alignment of
the burner head and the burner ring is not important.
Note:
If the burner parts are fitted at an angle, the
appliance will not work.
3
#
+
(
Ventilation openings (underneath pan
support)
0
Pan support
8
Standard output burner 2.0 kW
@
High output burner 4.0 kW
H
Control knob, front hotplate
P
Control knob, rear hotplate
Indicator
Meaning
Û
Off
Appliance off
Ú
Lit continuously orange
Appliance on
ˆ
Flashing orange
Appliance off
Residual heat indicator
ˆ
Flashing orange and white
alternately
Safety shut-off, power fail-
ure
ˆ
Flashing yellow and
magenta alternately
Appliance fault
Call the after-sales service.
Ú
Lit green and then yellow
for some seconds
Appliance initialising,
only after first installation or
power failure
