background image

For Your Safety

You must not operate the appliance if it is damaged.

When connecting electrical appliances in the proxi -
mity of the appliance, make sure that connec ting
leads do not come into contact with hot cook ing
surfaces!

As the user, you yourself are responsible for
mainte nance and proper use in the household.

Do not operate this appliance with an external timer
or a separate telecontrol system.

Only ever operate the appliance under super vision.

Do not operate the appliance without pots and pans
placed on it. Make sure that all the burner parts are
correctly fitted.

Caution: 

The appliance heats up during opera tion.

Keep children away.

Do not clean the appliance with a steam cleaning
apparatus or with water pressure - 

risk of short-

circuits!

Isolate the appliance from the mains during every
maintenance operation. To do this, remove the
mains plug or switch off the corresponding
household fuse. Close the gas supply.

Repairs must be carried out by authorised specia -
lists, thus ensuring electrical safety.

No warranty claims can be lodged for any damage
resulting from failure to observe these instructions.

Observe caution

with oils and fats. They may

overheat and burn easily.
Foodstuffs that are prepared in fat and oil must only
be prepared under constant supervision!

Technical modifications reserved.

Operating for the First Time

Remove the packaging from the appliance and
dispose of it according to local regulations. Be
careful to remove all accessories from the
packaging. Keep packaging elements and plastic
bags away from children.

This appliance is labelled in accordance
with the European Directive 2002/96/EG
concerning used electrical and electronic
appliances (waste electrical and
electronic equipment – WEEE). The

guideline determines the framework for the return
and recycling of used appliances as applicable.

Check the appliance for transport damage before
installing it.

The appliance must be installed and connected by
an authorised specialist before operation. The
installation must conform with all current regulations
of the gas supply companies and the regional
construction regulations. 

Turn the control knob to the OFF position before
connecting the appliance to the power supply. 

The serial number of the appliance can be found on
the quality control slip which is included with these
instructions. This quality control slip should be kept,
for guarantee reasons, together with your operating
and assembly instructions.

Read through these instructions attentively before
operating your appliance for the first time.

Thoroughly clean the appliance and accessories
before using them for the first time. This will
eliminate any 'newness’ smells and soiling (see
chapter “Cleaning and Care”).

3

1. Important Notes

$

Summary of Contents for VG 441-110





























Reviews: