Gaggenau VI 414 613, Use And Care Manual

27

 Home Connect  

en-us

Manual Registration in the Home Network

Note: 

To log in to the home network (Wi-Fi) manually, 

you require the network name (SSID) and password (key) 
for your home network.

1.

Wait for two minutes until the illuminated ring on the 
control knob flashes red once and 

’‹¯ ƒ

 lights up on 

the control panel.

The appliance is now in manual mode.

2.

Switch to the general settings menu of your mobile 
device and call up the Wi-Fi settings.

The "Home Connect" Wi-Fi connection is available on 
your mobile device. 

3.

Connect to the "Home Connect" (password: 
"HomeConnect") Wi-Fi connection.

4.

Launch the app on your mobile device and follow the 
instructions for automatic network login.

5.

The appliance is available in the app on the mobile 
device once 

Ö 

 lights up on the control panel and the 

illuminated ring on the control knob lights up green. 

Note: 

If the illuminated ring on the control knob lights up 

red, it was not possible to establish a connection to the 
home network. Check the router and start the connection 
process again. Check that you have correctly entered the 
password.

Restarting the connection process

1.

Turn the control knob anti-clockwise to position 

0

.

The illuminated ring on the control knob lights up 
blue.

2.

Turn the control knob clockwise to position 

ª

 or 

¹

.

On the control panel, 

••’

 and 

’‹¯‚

 are displayed 

alternately. The illuminated ring on the control knob 
flashes blue. The cooktop is now ready for registration 
in the home network.

Exiting the Home Connect settings menu

1.

Carry out the following operating steps one after the 
other without interruption.

2.

Push in the control knob and turn it anti-clockwise to 
the 

Ž 

 position.

3.

Turn the control knob clockwise to position 

ª

 or 

¹

.

4.

Turn the control knob anti-clockwise to position 

0

.

The illuminated ring on the control knob goes out.

Switching the Wi-Fi on/off

You can switch off the Wi-Fi on your cooktop at any time 
(e.g. to save energy during a vacation). The connections 
to the home network and to the extractor hood remain 
saved. When you switch the Wi-Fi back on, the saved 
connections are applied.

1.

Carry out the following operating steps one after the 
other without interruption.

2.

Push in any control knob and turn it anti-clockwise to 
the 

Ž 

 position.

3.

Turn the control knob clockwise to position 

ª

 or 

¹

.

4.

Turn the control knob anti-clockwise to position 

0

.

The illuminated ring around the control knob lights up 
blue.

5.

Turn the control knob clockwise to position 

1

.

The illuminated ring around the control knob lights up 
green. 

Ö

 lights up on the control panel. After 

five seconds, the Wi-Fi is switched off and the 
illuminated ring on the control knob lights up blue. 
The 

Ö

 symbol on the control panel goes out.

If you want to switch the Wi-Fi back on, run through the 
same operating sequence. The illuminated ring on the 
control knob lights up blue. After 5 seconds, the Wi-Fi is 
switched on and the illuminated ring around the control 
knob lights up green. 

Ö

. lights up on the control panel.

Resetting the Connection

You can reset the connections you have saved for your 
home network and cooktop at any time.

1.

Carry out the following operating steps one after the 
other without interruption.

2.

Push in any control knob and turn it anti-clockwise to 
the 

Ž 

 position.

3.

Turn the control knob clockwise to position 

ª

 or 

¹

.

4.

Turn the control knob anti-clockwise to position 

0

.

The illuminated ring around the control knob lights up 
blue.

5.

Turn the control knob clockwise to position 

2

.

¥“†

 lights up on the control panel. After 30 seconds, 

the connection is reset and the illuminated ring on the 
control knob flashes. The connection is reset once 

š‹¯“

 lights up on the control panel and the 

illuminated ring on the control knob lights up green.