Gaggenau VI 482 103, Instruction Manual

16

en

       PowerBoost function

Stopwatch function

The stopwatch shows the cooking time that has elapsed 
so far in minutes and seconds (mm.ss). The maximum 
duration is 99

minutes and 59

seconds (99.59). If this 

value is reached, the display starts again at 00.00.

The stopwatch works independently of the hotplates and 
other settings. This function does not automatically 
switch off a hotplate.

Activating

1

Select a heat setting. The 

®

 indicator will be lit.

2

Touch the 

®

 symbol. 

‹‹

.

‹‹

 will be lit on the 

stopwatch display.

The time will now start to elapse.

Stopping the stopwatch

Touch the 

®

 symbol to stop the stopwatch. The 

stopwatch indicators will remain lit.

Touch the 

®

 symbol again to restart the stopwatch.

Deactivating

Press and hold the 

®

 symbol for a few seconds. This 

will stop the stopwatch, and the stopwatch indicators 
will go out.

This function has now been deactivated.

v

PowerBoost function

PowerBoost function

The PowerBoost function enables you to heat up large 

volumes of water faster than when using heat 
setting 

‚ƒ

.

This function is available for all hotplates, provided the 
other hotplate in the same group is not in use. 
Otherwise, 

˜

 and 

‚ƒ

 will flash on the display for the 

selected hotplate; the 

‚ƒ

 heat setting will then be set 

automatically without activating this function. In this 
case, turn the control knob to position 0.

Note: 

The PowerBoost function can also be activated in 

the flexible area if the cooking zone is being used as a 
single hotplate.

Activating

Push in the control knob and turn it to position 

Ž

. The 

˜

 and 

Ž

 indicators will light up.

The function has now been activated.

Deactivating

Turn the control knob to the heat setting you require. 

˜

 and 

Ž

 will go out and the heat setting you have 

selected will be lit.

This function has now been deactivated.

Note: 

In certain circumstances, the PowerBoost 

function may switch itself off automatically in order to 
protect the electronic elements inside the hob.
In this case, heat setting 

‚ƒ

 will automatically be set. 

Turn the control knob to position 0

or whichever heat 

setting you require.