Gaggenau VI 482 103, Instruction Manual

23

 Home Connect      

en

Note: 

If you select settings in the Home Connect 

settings menu, you must exit the Home Connect menu in 
the same way to save the settings.

Displays on the illuminated ring on the control knob

▯

While you are in the Home Connect menu, the 
illuminated ring on the control knob lights up blue.

▯

While the appliance is establishing a connection 
with the WiFi, the illuminated ring on the control 
knob flashes blue.

▯

If the appliance has established a connection with 
the WiFi, the illuminated ring on the control knob 
lights up green.

▯

If the appliance was not able to establish a 
connection with the WiFi, the illuminated ring on 
the control knob lights up red.

Setting up

To implement settings via Home Connect, you must have 
installed and set up the Home Connect app on your 
mobile device.

Note: 

In networked standby mode, your appliance 

requires max. 2 W.

Setting up the Home Connect app

Note: 

You require a mobile device with the latest 

version of the relevant operating system.

1

On your mobile device go to the App Store (Apple 
devices) or to the Google Play Store (Android 
devices). 

2

Enter "Home Connect" in the search field.

3

Select the Home Connect app and install on your 
mobile device.

4

Start the app and create your Home Connect login 
details. The app will guide you through the 
registration process. Make a note of your e-mail 
address and password.

Connecting the appliance to your home network

1

Carry out the following operating steps one after 
the other without interruption.

2

Push in any control knob and turn it anti-clockwise 
to the 

Ž 

 position.

3

Turn the control knob clockwise to position 

ª

 or 

¹

.

4

Turn the control knob anti-clockwise to position 

0

.

The illuminated ring on the control knob lights up 
blue.

5

Turn the control knob clockwise to position 

ª

 or 

¹

.

On the control panel, 

••’

 and 

’‹¯‚

 are 

displayed alternately. The illuminated ring on the 
control knob flashes blue. The hob is now ready for 
registration in the home network.

Automatic registration in the home network

You require a router that has WPS functionality. You can 
find information about this in the manual for your router. 
You need to be able to access your router.

If you cannot access it, follow the steps for "Manually 
logging into your home network".

1

Press the WPS button on the router within the next 
two minutes.

2

Launch the Home Connect app on your mobile 
device and follow the instructions for automatic 
network login.