27
Connecting an extractor hood
en
Connecting directly
Note:
If you connect your hob directly to the extractor
hood, it can no longer be connected to your home
network as well and you can no longer use Home
Connect.
1
Carry out the following operating steps one after
the other without interruption.
2
Push in one of the control knobs and turn it anti-
clockwise to position
Ž
.
3
Turn the control knob clockwise to position
ª
or
¹
.
4
Turn the control knob anti-clockwise to position
0
.
The illuminated ring on the control knob lights up
blue.
5
Turn the control knob clockwise to position
ª
or
¹
.
On the control panel,
••’
and
’‹¯‚
are
displayed alternately. The illuminated ring on the
control knob flashes blue. The hob is now ready for
registration in the home network.
6
You have two minutes to initiate the connection on
the extractor hood. For more information, refer to
the section entitled "Connecting to the hob" in the
instruction manual for your extractor hood.
The connection process may take a few minutes.
The hob is connected to the extractor hood once
˜‘‚
lights up on the control panel and the
illuminated ring on the control knob lights up green.
The
Ö
symbol is displayed on the hob's control
panel.
Save the connection and exit the settings menu
1
Carry out the following operating steps one after
the other without interruption.
2
Push in the control knob and turn it anti-clockwise
to the
Ž
position.
3
Turn the control knob clockwise to position
ª
or
¹
.
4
Turn the control knob anti-clockwise to position
0
.
The illuminated ring on the control knob goes out.
Control the hood via the hob
In the Home Connect app, you can adjust the behaviour
of your extractor hood depending on whether the hob or
individual cooking zones are switched on or off.
Summary of Contents for VI 482 103
