background image

en 

Locking the control panel for cleaning

18

​⁠

​⁠

Croutons

3

6-10

Almonds/walnuts/pine nuts

4

3-15

1

Turn frequently.

2

Cooking time per serving. Fry one portion after the
other.

14.5 Switching on the Frying Sensor

1.

Place the cookware in the centre of the cooking
zone.

Ensure that the diameter of the cookware base
matches the size of the hotplate.

2.

Push in the control knob  ​⁠ and select the required
temperature level  ​⁠. 
→ 

"Recommendations for cooking with the frying

sensor", Page 17

1

2

For this function, the temperature levels 1 to 5 are
available. 
→ 

"Temperature levels", Page 16

If you select a temperature setting above 5, the ap-
pliance automatically sets the temperature level 5.

3.

Press 

​⁠.

a

​⁠ lights up orange.

a

​⁠ and the selected temperature level light up.

a

The function is activated.

a

​⁠,  ​⁠ or  ​⁠ and the temperature setting you have selec-

ted will remain lit until the frying temperature has
been reached.

a

Once the set temperature is reached, a signal tone
sounds and the temperature display goes out.

4.

Once the frying temperature has been reached, add
the oil and then the food to the pan.

5.

Turn the food so that it does not burn.

14.6 Switching off Frying Sensor

Turn the control knob that you used to select the
temperature to 0.

a

The cooking zone is switched off.

a

The residual heat indicator lights up.

15  Locking the control panel for cleaning

You can use this function to lock the control panel for
cleaning for a short time. You can remove liquids that
have boiled over without changing the settings you
have selected on the activated hob.
The function has no effect on the control knob. You
can switch off the appliance at any time. The power
supply to the appliance is interrupted while the lock is
on. The cooking zones may still be hot.

15.1 Activating the control panel lock for
cleaning

Press  ​⁠.

The power supply to the appliance is interrupted
while the lock is on. The cooking zones may still be
hot.

a

A signal tone sounds.

a

The displays for the previously activated functions
flash.

a

The control panel is locked for 10 minutes.

a

The appliance switches off if you do not deactivate
the function within the next 10 minutes.

15.2 Deactivating the lock on the control
panel for cleaning purposes

Press  ​⁠.

a

The function has now been deactivated.

Summary of Contents for VI482105













































Reviews: