Preparing the cabinet
The building back wall (1) and building side walls
(2 / 3) must consist of non combustible material or
must be protected by no less than
1
/
4
-inch-thick
flame-retardant millboard covered with no less than
No. 28 MSG sheet steel, 0.015-inch-thick stainless
steel, 0.024-inch-thick aluminimum, or 0.020-inch-
thick copper.
1
Building back wall
2
Building side wall
3 Building side wall
4 Top building cabinet
5 Grilling
surface
6 Distance = 30 inch (762 mm)
7 Work surface: Both work surfaces must be built-
in on both sides, when the grill is built in
separately (INSTALLATION A).
When installed next to another Vario appliance,
a work surface must be built in on the opposite
side (INSTALLATION B).
When the grill ist installed between two other
Vario appliances, no work surface is required
(INSTALLATION C).
16
2
1
5
4
3
7
7
Installation A
Installation B
Installation C
6
Summary of Contents for VR 421-611
Page 1: ...Operating and Assembly Instructions VR 421 611 Electric Grill...
Page 2: ......
Page 23: ......