Gaggenau VR 421-611, Operating And Assembly Instructions Manual

5

Operating for the first time

Remove the packaging from the appliance and
dispose of it according to local regulations. Be
careful to remove all accessories from the
packaging. Keep packaging elements and plastic
bags away from children.

Check the appliance for transport damage before
installing it.

The appliance must be installed and connected by
an authorised specialist before operation. Before
operating the appliance for the first time, make
sure that the mains connection is in proper working
order.

The serial number of the appliance can be found on
the quality control slip which is included with these
instructions. This quality control slip should be kept,
for warranty reasons, together with your operating
and assembly instructions.

Read through these instructions carefully before
operating your appliance for the first time.

Before using the appliance for the first time, take
the lava stones out of the plastic bag and pour them
into the lava stone container.

Thoroughly clean the appliance and accessories
before using them for the first time. Then heat up
the appliance at level 12 for a few minutes. This will
eliminate any 'newness' smells and soiling.

About use

The appliance is intended solely for household use
and must not be put to any other uses.

Use the appliance to prepare meals only. Do not use
the appliance to heat up the room in which it is
installed.

Do not use the appliance to store items. 

Switch off the grill after use. Allow the grill to cool
down and then clean. We recommend you clean the
grill after every use. A greasy grill is a fire risk.

Built-in overheating protection prevents overheating
of the appliance and of surrounding kitchen 
furniture.

In the event of malfunction, first check your
household fuses. If the power supply is in proper
working order, and the appliance is still not
functioning, please inform your specialist dealer 
or your nearest Gaggenau customer service.