20
en-us
Installation Instructions
9
WARNING
TO REDUCE RISK OF FIRE OR ELECTRIC
SHOCK.!
Do not reuse this Power Adapter with a new
purchase of a Dryer. The old Power Adapter must
be discarded with the old Dryer. A new Power
Adapter must be used when a new Dryer is
installed.
ALL ELECTRICAL CONNECTIONS AND CIRCUITS
:
WARNING
▯
Electric shock hazard!
▯
Do not pull on the power
cord to unplug the dryer.
▯
Protect the power cord from physical damage
such as being twisted, kinked, pinched, or
walked on.
▯
DO NOT use an extension cord to connect the
dryer to the power supply.
▯
Make sure:
–
The power cord fits into the outlet/receptacle.
–
The home’s internal power supply circuit wire size
is sufficient and electrically grounded.
▯
Do not cut, remove or bypass the grounding
prong on the power cord end.
▯
Do not modify the plug provided with the
appliance; if it will not fit the outlet, have a
proper outlet installed by a qualified electrician.
▯
The power cord must only be replaced by a
qualified service provider or licensed
electrician to help avoid a fire/electric shock
hazard.
Use only manufacturer recommended
replacement power cords purchased through
our Customer Service department.
▯
Do not use NEMA 14-30P (4-prong) nor 10-30P
(3-prong) power cords on this appliance.
▯
Do not reuse old power cord.
▯
Do not make a sharp bend or crimp wiring or
conductors at connections.
▯
Electric shock hazard!
To reduce the risk of
electrical shock:
▯
Only pull out the power cord by the plug end
and never by the cord, as this could damage it.
▯
Never touch or hold the plug end or power cord
with wet hands.
▯
Never unplug the plug end during operation.
9
WARNING
Electric shock hazard!
Improper connection of the equipment-grounding
conductor can result in a risk of electric shock.
Check with a qualified electrician or servicer if you
are in doubt as to whether the appliance has been
properly grounded.
GROUNDING INSTRUCTIONS
9
WARNING
Electric shock hazard!
This appliance must be electrically grounded. In
the event of malfunction or breakdown, grounding
will reduce the risk of electric shock by providing a
path of least resistance for electric current.
This appliance is equipped with a cord that has an
equipment grounding conductor and a grounding
plug.
The plug must be plugged into an appropriate
outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
If a ground fault circuit breaker is used, ensure it
has this symbol:
z
.
Only this symbol can assure compliance with all
current regulations.
SAVE THESE INSTRUCTIONS!
Summary of Contents for WT262700
