27
Getting to know your appliance
en-us
|
OFF: Wi-Fi is off.
Flashing: The appliance is trying to connect to your home network or broadcasting “Home Connect” hot-
spot.
Lit: Wi-Fi is on and the appliance is connected to your home network.
Drying cycle status sequence:
æ
Drying process started. Textiles are very damp.
å
Drying process progressing. Textiles are damp.
5
Drying process completing. Textiles nearly dry.
Q
5
(Wrinkle Block™) phase activated
e.g.
‚
:
…‹
Expected program duration in hours and minutes.
Note:
Drying time may vary from initial displayed time depending on the size of load, type of and mixture of fab-
rics and initial moisture content of the load.
-
˜
-
Pause
Shown when
A
(Start/Pause)
button is pressed on control panel,
Pause
is activated from App, or door is
opened during the drying cycle. If you remove heated items from the dryer it is recommended to spread
them out allowing the heat to dissipate.
NOTICE
If the door remains closed the drum may begin rotating 30 seconds after pausing to cool down the load
and
•©£
will be displayed. This process can take up to 10 minutes and the program should not be
changed during this time.
Press the
A
(Start/Pause)
button on control panel or
Continue
in the App at any time to start the drying
process again.
-
‹
-
Program end
•©£
Cool Down
Indicates dryer is operating to reduce the temperature of the load. This process can take up to 10 min-
utes. May appear if:
▯
program is paused via the control panel or remote app, or
▯
program is stopped or dryer is switched off via the remote control app.
Indicator
Description
Summary of Contents for WT262700
