31
Operating Instructions
en-us
Loading the laundry
9
WARNING
Risk of explosion!
Do not dry laundry that has ever been in contact
with solvents, oil, wax, grease or paint (e.g. nail
varnish remover, stain remover, cleaning solvent,
etc.).
1.
Check lint filter.
The filter should be cleaned after or before every
drying process. Cleaning the filter reduces the drying
time and saves energy.
2.
Load the laundry into the drum and close the door.
Tip:
If the door has not been closed properly, the dryer
will not start.
Tips
▯
After loading, close the door carefully so as not to
trap any items between the door and the rubber seal.
The door should be closed until a click is heard.
▯
Foreign objects left in the drum may damage laundry.
Before inserting any laundry, check to make sure no
foreign objects are in the drum.
Recommended Load Size
Recommended maximum load size can be found in the
program selection table in this manual.
Load the laundry
Place laundry in the empty drum. Put each piece of
laundry into machine separately.
For best results the laundry should be sorted according
to type of laundry and desired degree of drying.
Starting the program
1.
Switch on the appliance. Rotate program selector to
the desired program. Select the program which
corresponds to the laundry in the dryer from Program
selection table.
The
A
(Start/Pause)
indicator light starts flashing.
2.
Press the
A
(Start/Pause)
button. Indicator lamp
lights up and the cycle starts.
During the cycle, the display area indicates the
estimated remaining time and, after starting the drying
cycle, the cycle duration and the symbols for the cycle
progress stay lit.
NOTICE
– If you want to protect the cycle against inadvertent
adjustment select the
¯
3 sec. (Child lock)
.
NOTICE
– If
é
indicator lights up, clean the lint filter and/or
Condenser.
,
L
Summary of Contents for WT262700
