40
en-us
Appliance settings
ò
(End Signal)
Use the
ò
(End Signal) button to activate or deactivate
the audible signal that sounds to indicate that the
program has ended. If the setting has been selected, the
button's indicator light will be lit and the signal tone is
activated.
5
(Wrinkle Block™)
If the
5
(Wrinkle Block™)
option is activated it prevents
the laundry from creasing or wrinkling. The drum rotates
at specific intervals after the drying process allowing the
load to remain loose and fluffy until removed.
If the
5
(Wrinkle Block™)
button is activated, this function
is set to 60 or 120 minutes.
The laundry should be removed before this time has
elapsed.
Appliance settings
Appliance settings
¯
3 sec. (Child lock)
You can secure the appliance against inadvertent
changing of the set functions. To do this, activate the
Child lock after cycle start.
To
Activate/Deactivate
, press
6
(Finish in)
M
and
N
for
approximately 3 seconds. In the display field, you will see
the
D
symbol light indicating the Child lock is active.
NOTICE
The Child lock will remain activated after the end of the
cycle. Even switching the appliance off and on will not
deactivate the Child lock. You must deactivate Child lock
and, if necessary, activate it again.
Activating setting mode
In order to change the default appliance settings
described below, you will first need to enter or activate
setting mode.
To enter or activate the setting mode:
1.
Switch on the appliance. The indicator lamp of the
program on position 1 (
(
) lights up.
2.
Press and hold
5
(Dryness Level)
button and, at the
same time, turn the program selector to position 2
(
0
).
3.
Release
5
(Dryness Level)
button.
The setting mode is now activated.
#
Summary of Contents for WT262700
