14
English
Set the “” water filter according to the measurements performed (see
“Measuring the water hardness”) and indicated on the base of the filter:
A
= soft water – equals 1 or 2 small squares
B
= hard water (standard) – equals 3 small squares
C
= very hard water – equals 4 small squares
Replacing the “” Water Filter
When the “” water filter needs to be replaced, the filter icon is displayed.
Replace the water filter by scrolling the menu until selecting the water filter as
described in the “ Filter Installation” chapter.
Select RESET and confirm with the OK button.
The machine is now programmed to manage a new “” water filter.
Insert the “I” water filter in the empty water tank and push it down to the
lowest point.
Fill the water tank with running water and put it back into the machine.
Dispense all the water in the water tank by using the hot water function (see the
“Dispensing Hot Water” chapter).
Then, fill the tank again.
1
Press the MENU button and scroll until selecting the water filter. Press the OK
button.
2
Select ON, then press OK and exit from the menu.
FIL
TER
OFF
ON
FIL
TER
OFF
ON
RESET
FIL
TER
4219-465-09521 MANUAL GAG. ANIMA PLUS 120V EN-FR-ES Rev 00.indd 14
08/04/2022 14:07:37
