18
English
Customization
Adjusting the amount of coffee in the cup
It is possible to adjust the amount of the beverage according to your taste and to
the size of the cups.
1
To adjust the amount of espresso, hold the ESPRESSO button until the display
shows the MEMO icon.
The machine enters the programming stage and starts preparing the selected
beverage.
2
When the cup contains the desired amount of espresso, press the OK button.
The tick on the display indicates that at every pressing the machine will prepare the
set amount of espresso.
Note
: To set the amount of
LONG ESPRESSO
, follow the same operation.
Adjusting the Aroma Strength
To modify the aroma strength, press the AROMA STRENGTH button. Every time
you press the AROMA STRENGTH button, the aroma strength changes by one
degree. The display shows the selected strength which will be saved by preparing
a cup of coffee.
1
Very light
2
Light
3
Normal
4
Strong
5
Very strong
Note
: you can also use the AROMA STRENGTH button to prepare coffee with pre-
ground coffee.
Dispensing Hot Water
Warning
: when the machine starts preparing hot water, the classic pannarello or
steam wand (depending on the model) spout may spray steam and hot water.
1
Place a container under the classic pannarello or steam wand (depending on
the model).
2
Press the HOT WATER button.
3
The machine will start dispensing hot water.
4
To stop hot water dispensing, press the OK button.
M
E
M
O
1
2
3
4
5
4219-465-09521 MANUAL GAG. ANIMA PLUS 120V EN-FR-ES Rev 00.indd 18
08/04/2022 14:07:43