23
English
Lubricating the Brew Group
In order to ensure perfect performances of the machine, it is necessary to lubricate
the brew group. Refer to the following table for the frequency of lubrication.
Frequency of use
Number of daily prepared beverages
Frequency of lubrication
Low
1-5
Every 4 months
Regular
6-10
Every 2 months
High
>10
Every month
1
Switch off the appliance and unplug it.
2
Remove the brew group and rinse it using lukewarm water (see “Brew Group
Cleaning under Running Water”).
3
Spread a thin layer of lubricant around the inserting pin in the lower part of the
brew group.
4
Spread a thin layer of lubricant onto the guides on both sides (see figure).
5
Reinsert the brew group (see “Reinserting the Brew Group”).
Note
: you can use the lubricant tube multiple times.
Cleaning the classic pannarello
Daily Cleaning of the classic pannarello
Remove the lower part of the classic pannarello and rinse it with running water.
4219-465-09521 MANUAL GAG. ANIMA PLUS 120V EN-FR-ES Rev 00.indd 23
08/04/2022 14:07:48