23
English
Lubricating the brew group
In order to ensure the perfect performance of the machine, it is necessary
to lubricate the brew group. Refer to the following table for the frequency of
lubrication.
Frequency of use
Number of beverages prepared
daily
Lubrication
frequency
Low
1-5
Every 4 months
Regular
6-10
Every 2 months
High
>10
Every month
1
Turn off the appliance and disconnect the power cord.
2
Remove the brew group and rinse it using lukewarm water - see the “Cleaning
the brew group under running water” chapter.
3
Apply a thin layer of the lubricant provided around the insertion pin on the
lower part of the brew group.
Cleaning the brew group with cleaning tablets for the
removal of oily coffee residues
Warning
: use only Gaggia cleaning tablets to remove oily coffee residues.
1
Place a container under the coffee dispensing spout.
2
Press the
CLEAN/SET
clean/setting
button and select the "CLEAN " button shown on
the display.
3
Select "BREW GROUP CLEANING" and press the "
" button, then press
START/STOP
START/STOP
button to start the cleaning procedure.
4
Follow the instructions shown on the display to clean the brew group correctly.
5
The procedure will take approximately 5 minutes.
START/STOP
START/STOP
button
can be used to pause and resume the procedure.
CLEAN
QUICK MILK CLEAN
DEEPMILK CLEAN
DESCALING
BREW GROUP
4219-465-02541 MAN. GAG. MAGENTA Milk EN-NL-PL Rev 02.indd 23
09/09/2020 16:48:10