21
English
2
Pour the milk into the milk carafe: the milk level must be between the minimum
(MIN) and the maximum (MAX) level indicators shown on the carafe. Place the
lid back.
Inserting the milk carafe
If installed, remove the water dispensing spout:
1
Press the two side buttons to unlock the dispensing spout and lift it slightly;
2
Pull the water dispensing spout to remove it.
3
Slightly tilt the milk carafe. Insert it all the way into the guides of the machine.
4
Push the carafe downwards while rotating it at the same time until it locks onto
the drip tray.
Note
: Do not force the carafe while inserting it.
Removing the milk carafe
Rotate the carafe upwards until it is naturally released from the insert in the drip
tray. Then, remove the carafe.
Dispensing frothed milk based coffee beverages
Tip
: use only cold milk (at a temperature of 5 °C approx.) and with at least a 3%
protein content so as to obtain a perfect milk foam. You can use either whole milk
or semi-skimmed milk. Also, you can use skimmed, soy or lactose-free milk.
1
Pull out the milk dispensing spout to the right up to the icon
.
Note
: if the milk dispensing spout has not been pulled all the way out, milk may not
be properly frothed.
2
Place a cup under the open milk dispensing spout
.
3
Press the
HOME
HOME
button and choose the desired beverage from the menu.
-
Press the button corresponding to the desired beverage.
-
Press the
START/STOP
START/STOP
button to start dispensing the selected
beverage.
4219-465-03661 MAN. GAG.MAGENTA PRESTIGE 120V EN-FR Rev 01.indd 21
21/01/2021 12:18:49
