27
English
Cleaning the milk carafe under running water
The milk dispensing spout is composed by 5 components. You can also wash all
components in the dish washer, apart from the milk container.
1
Milk tube
2
Rubber holder
3
Pannarello
4
Pannarello Connector
5
Milk Dispensing Spout Housing
1
Remove the milk dispensing unit lid (fig. 21).
2
Press the releasing buttons on both sides of the upper part of the milk
dispensing unit (1) and pull out the upper part of the milk container (2) (fig. 22).
3
Remove the milk dispensing spout from its dispensing unit (fig. 23).
4
To disassemble the dispensing spout:
-
Overturn the milk dispensing unit and hold it firmly in your hand. Pull out
the milk tub from the holder (fig. 24);
-
Press the release buttons on the Pannarello and remove the Pannarello
from the rubber holder. (fig. 25);
-
Pull out the connector from the Pannarello. (fig. 26);
5
Wash all components under running water.
6
After cleaning, reassemble all the components by following the same
procedure in reverse order.
Cleaning the brew group
Warning
: do not wash the brew group in the dishwasher and do not use
dishwashing detergents, since they may cause the malfunctioning of the brew
group and alter the coffee flavour.
Removing the brew group
1
Turn off the machine and disconnect the power cord.
2
Remove the drip tray and the coffee pucks container.
3
Open the service door.
4
Press the PUSH lever (1) and pull the handle of the brew group (2) to remove it
from the machine.
2
1
4219-465-03661 MAN. GAG.MAGENTA PRESTIGE 120V EN-FR Rev 01.indd 27
21/01/2021 12:19:03
