13
ENGLISH
2
Press the “
” button to start the cycle. The machine starts the au-
tomatic priming of the circuit by dispensing some water through the
steam wand.
3
When the process is complete, the“
” and “
” buttons fl ash. The
machine is warming up.
Automatic Rinse/Self-Cleaning Cycle
When warm-up is completed, the machine automatically performs a rinse/
self-cleaning cycle of the internal circuits with fresh water. This takes less
than a minute.
4
Place a container under the dispensing spout to catch the small
amount of dispensed water.
5
The "
" and "
" buttons fl ash during the entire process.
6
Wait for the cycle to fi nish automatically.
Note:
You can stop the dispensing process by pressing either the "
" or the "
"
button.
7
When the above steps are complete, check that the “
“, “
”, “
”
and “
” lights are lit.
