20
English
Cleaning of the Capp in Cup system under running
water
Warning
: the steam tube may be hot after use.
1
Remove the Capp in Cup system from the steam tube (Fig. 23).
2
Remove the rubber handle from the steam tube. (Fig. 24).
3
Remove the Capp in Cup system spout (Fig. 25).
4
Remove the milk suction tube from the main body of the Capp in Cup system
(Fig. 26).
5
To disassemble the main body:
-
hold it tight from the sides as shown (Fig. 27);
-
pull and extract the left part as shown in figure (Fig. 28);
6
Remove the rubber lid (Fig. 29).
7
Disassemble the glass milk carafe (Fig. 30).
8
Wash all components under running water.
9
After cleaning, reassemble all the components by following the same
procedure in reverse order.
Cleaning the brew group
Warning
: do not wash the brew group in the dishwasher and do not use
dishwashing detergents, since they may cause the malfunctioning of the brew
group and alter the coffee flavour.
Removing the brew group
1
Turn off the machine and disconnect the power cord.
2
Remove the drip tray and the coffee pucks container.
3
Open the service door.
4
Press the PUSH lever (1) and pull the handle of the brew group (2) to remove it
from the machine.
2
1
4219-465-05211 MAN. GAG. MAGENTA Milk 127V EN-PT Rev 02.indd 20
05/05/2021 16:18:10
