ENGLISH
• 29 •
grinding and dispensing cycles, which are
automatically managed by the machine.
• Then, the dispensing cycle starts.
• After carrying out the prebrewing cycle,
coffee will start to come out of the spout
(Fig.01, pos.13).
The coffee will stop fl owing automatically
when the preset level is reached (see
par.7.3). You can interrupt the fl ow of coffee
by pressing the button (Fig.01, pos.23 or
24).
7.2 Making coffee with ground coffee
In this operating mode, you must use
the supplied measuring spoon (Fig.01,
pos.19) to dose the ground coffee.
Only use ground coffee suitable for
espresso coffee makers in the doser (5);
placing coffee beans, instant coffee and other
materials inside the doser causes damage to
the appliance.
Keep fi ngers away from the ground
coffee doser since there are moving
parts.
Use the supplied measuring spoon (19) to
measure the right quantity of ground coffee
to place in the doser.
Use only one fi lled measuring spoon at a time;
to make two coffees, you must go through the
entire process twice.
• Press the button (22) to select the function;
the LED lights up.
• Lift the cover of the ground coffee doser
(Fig.13).
• Fill the measuring spoon with one coffee
dose; discard any excess quantity of ground
coffee.
• Fill the doser with the ground coffee
(Fig.14)
• Close the cover of the ground coffee do-
ser.
• To make the coffee, press the desired coffee
button (23) or (24); the selected button starts
fl ashing (see chapter 15), while the other
switches off.
• The dispensing cycle begins.
• After carrying out the prebrewing cycle,
coffee will start to come out of the spout
(13).
• The coffee will stop fl owing automatically
when the preset level is reached (see par.
7.3).
You can interrupt the fl ow of coffee by pres-
sing the button (23) or (24).
• Then the machine automatically returns
to the normal operating mode (see para.
7.1).
7.3 Adjusting the quantity of coffee per
cup
Your coffee maker has been programmed to
make 2 types of coffee: espresso coffee with
the button (23) and weak coffee with the
button (24).
To adjust the programmed values to the size
of your cups, place the cup under the coffee
dispenser (13), press the button of the desi-
red type of coffee (23) or (24) and keep it
pressed.
Wait for the machine to fi ll the cup up to the
desired level and, then, release the button.
Note: keep the button (23) or (24)
pressed during the entire coffee dispen-
sing process.
In this way, the appliance is programmed to
supply the quantity of coffee you selected.
8 MAKING
HOT
WATER
Caution: splashing may occur at the
start - scalding hazard! The hot water
nozzle and pipe can reach high temperatures:
avoid touching directly with your hands.
• Before dispensing hot water, make sure that
the green temperature-ready LEDs (23 and
24) emit a fi xed light.
Proceed as follows when the appliance is
ready to dispense hot water.
• Place a cup and/or pitcher under the steam/
