background image

Pub. 42004-520A 

NEMA 4X VoIP Telephones 

Page 14 of 15 

P:\Standard IOMs - Current Release\42004 Instr. Manuals\42004-520A.docx 
03/17 

Specifications 

Power Requirements 

DC Power Supply 

Input voltage ........................................................................................................ 24 V dc to 48 V dc 

Power-over-Ethernet ......................................................................................................................... 12.95 W 

 

802.11af compliant (via RJ45) Power Mode A, Class 0 

VoIP Network 

Network ....................................................................................... 10/100 BaseT Ethernet RJ45, Cat5/6 UTP 

 

Static IP or DHCP STUN client (NAT traversal) address provisioning 

Call control signaling .................................. SIP (RFC3261 compliant) Loose routing call control signaling 

Configuration

 ........................................................................................................... Embedded web server 

 

Configuration file download 

 

Direct serial connection 

 

Password protection 

Handset Audio 

Analog microphone gain ........................................................................................................................30 dB 

Analog earpiece gain ............................................................................................................. Default: +20 dB 

 

Setting 2: +12 dB 

 

Setting 3: 0 dB 

Frequency response ........................................................................................................... 250 Hz to 6500 Hz 

Frequency response flatness ................................................................................................... 3 dB minimum 

THD @ 1 kHz ........................................................................................................................... 1% minimum 

Inputs 

Keypad* ....................................................................................................................................... 3 × 4 matrix 

Push buttons ........................................................................................................................... Volume control 

Configurable inputs (quantity = 4) ............................................................. Internal pull-up 3.3 V dc tolerant 

*Not available on all models. 

Outputs 

Output 1 .................................................................... 5 A @ 30 V dc or 120 V ac maximum (resistive load) 

Output 2 .................................................................... 5 A @ 30 V dc or 120 V ac maximum (resistive load) 

Indicators 

Internal on VoIP Circuit Board ................................................................. Power, Heartbeat, & EACT LEDs 

Monitoring and reporting ............................ Real-time over TCP/IP proprietary Syslog application or email 

 .................................................................................................................................. Embedded SMTP client 

 ............................................................................................................................... Automatic fault reporting 

Environmental 

Operating temperature ........................................................................... −4 ºF to +140 ºF (−20 ºC to +60 ºC) 

Weather resistance .................................................................................... NEMA Type 4X with door closed 

Humidity ....................................................................................................................... 90% non-condensing 

Mechanical 

Enclosure (gray, yellow, orange, or red) ............................................................................ Engineered plastic 

Summary of Contents for 354-700

















Reviews: