Pub. 42004-543A
Retrofit VoIP Telephones
Page 18 of 21
P:\Standard IOMs - Current Release\42004 Instr. Manuals\42004-543A.docx
03/20
Figure 13. GAI-Tronics Models 540-001 and 541-001 Strobe Connection Detail
Programming
The network configuration must provide VoIP service (using the SIP protocol) between the desired
locations before attempting to configure a GAI-Tronics VoIP telephone.
The general sequence to set up a VoIP telephone is as follows:
VoIP PCBA Setup
1.
Connect a PC to the same network as the VoIP telephone.
2.
Log into the unit’s web interface.
The unit is factory configured with a static IP address:
192.168.1.2.
3.
Enter the username and password when prompted.
The initial factory settings are:
•
U
SER
N
AME
:
user
•
P
ASSWORD
:
password
4.
Change the username and password upon first login.
This security measure helps prevent unauthorized changes to the VoIP telephone’s interface
configuration.
