Do not leave small objects inside the product to prevent choking hazards.
Use only spare parts approved by the manufacturer. Do not apply accessories to the
product, which are not supplied by the manufacturer.
Do not adjust the product with the child inside. Do not move the product with the
child inside. Do not use the product with more than one child at a time.
The product must be kept away from electric cables and cords: do not place the
product near windows where cords, curtains or similar objects could pose choking or
strangling hazards for the child. To avoid strangling hazards, do not give to your
child or place near him, objects equipped with cords.
As this is a natural wood product, prolonged exposure to the sun may cause
changes of tones to the product's colour.
All assembly fittings should always be tightened properly and care should be
taken that no screws are loose, because a child could trap parts of the body or
clothing (e.g. strings, necklaces, ribbons for babies' dummies, etc.), which would
pose a risk of strangulation.
Important
- "Co-Sleeping Crib mode (Fixed to the parent's bed)", before laying
the child in it, make sure that the connection belts are in place and
tensioned properly, the product must be fully secured to the parents' mattress and no
gaps between the products and the adults' mattress must be present.
The product must always be placed on a horizontal surface. Never leave the product
on an inclined surface with the child inside of it.
Children must not be permitted to play without supervision near the product.
Do not use the product without the side panel (textile) in place and fully assembled.
Keep the fastening belts away from the reach of children.
WARNING - IMPORTANT FOR THE SAFETY OF YOUR CHILD: Co-
S
leeping Crib Mode
this mode is only possible with bed types that comply with
all of the conditions described in this booklet. The crib should be firmly secured to
the structure of the parents bed with straps supplied. Once secure, if there is a
gap of more than 13mm
/
1
/2
" between the textile side panel of the crib
&
the
parents' bed DO NOT USE.
Further, the crib mattress surface should be positioned at least
4
"
/
1
08
mm BE
L
O
W
the level of the parents' mattress. c (see fig. "step 13").
WARNING:
Check to make sure that the crib in the Co-Sleepin
g
Crib
mode does not interfere with the parent's bed.
11
