10
/
12
device requires a minute or two to establish a location and send the first record upon waking.
10.1 SMS:
*sleep*1-99*
(1-99 represents hours of deep sleep period.)
Device Response:
“System is going to enter deep sleep function, data will be uploaded every XXX
hours.”
10.2 SMS:
*sleepoff*
Device Response:
“System has ended deep sleep function.”
11. Geofencing
The device is equipped with an automatic GeoFencing function that will, on command set a
01-
99km radius “bubble” around the device. Movement within this area is ignored. Crossing outside
can become an SMS alert. To set the GeoFence, from the master controller;
11.1 Set the Geofence
SMS
*fence*1-99*
Device Response:
“The GeoFence is set. Radius is set to XXX km”
Movement that exits the geofence will be immediately texted to the master controller as a
“GeoFence Exit Alert.”
11.2 Disable the Geofence
SMS
*fenceoff*
Device Response:
“The Geofence is disabled.”
It should be noted, that if you disable the SMS, Movement Alert and the Movement Call Alert; but
have the GeoFence Alert in place, the first message notifying you of movement will be the
GeoFence Exit.
12. Status query
SMS:
*status*
System Health and status check. Returns text message indicating various system diagnostics
13. Multi Controller
This allows any SMS enabled cell device to query the unit for location, status, etc.
SMS:
*multiquery*
“Multi query feature enabled.”
SMS:
*multiqueryoff*
The unit will now only respond to the Master controller.
Device Response: to the Master Controller:
“Multi query feature disabled.”
14. Device Information
SMS:
*about*
You will receive a text message include software
edition information and device’s serial number.
