Thermal Receipt Printer
10
(2) Ethernet Port Connection (If you need to set the port to Ethernet)
a.
b.
a. Get the IP address from the printer self-testing page:
According to above operation 8-a to print the self-testing page,
then you can get the current setting information.
And then, as is shown in the above picture, open the
“Properties” of printer Driver, select the “Port”.
b. As shown in the above picture,
click “Add Port” and then click “New Port”
c.
d.
c. Click “Next”
d. Enter the IP address
e
f.
e. Select “Generic Network Card” and then click “Next”
f. Check the information and click “Finish”
