Hollywood
@
Home
TV2
GO
Quick Start
Copyrights and Liabilities
The information contained in this manual has been validated at the time of publication. The
manufacturer reserves the right to make any changes and improvements to the products
described in this manual at any time and without prior notice. Consequently, the
manufacturer assumes no liability for damages incurred directly or indirectly from errors,
omissions or discrepancies between the product and the manual.
All registered trademarks are the property of their respective owners.
Copyright © 2004 All rights reserved. No reproduction of this document in any form is
permitted without the prior written authorization from the manufacturer.
Trademark
All products and company names are trademarks or registered trademarks of their respective
holders.
Contents
-TV2GO
-TV2GO Software and DriverCD
-TV2GOQuick Start Manual
-Remote Control with Batteries
-USB B-to- B Cable
-Audio Input Cable
-Audio Output Cable
-S-Video Cable
-Composite Video Cable
-SVHS to RCA Cable
Page 1
Page
2
Page
3
Installation Step 1: Turn on the PC
Power on the PC and wait until Windows is running
Installation Step 2: Install Driver
1. Plug in the TV2GO into the USB slot
2. Windows should automatically ask for driver
3. Put the CD-ROM into the cd-rom drive
4. Direct the installation program to look for driver in the
“EMPIA0910 For LG” directory in the CD-ROM
Installation
Step 3: Install the TVR Program
1.
You need to install the drivers manually. Insert your
driver CD disk into CD-ROM and run it.
2.
Please choose setup language then click on “Next”
and follow the instructions on the screen.
3.
To finish the installation select “Finish”, then enter
the CD key. Later you will also find an icon on desk-
top area to launch the TV2GO.
Installation Step 4: Install Driver
Audio output to PC audio line in
Audio input
S-Video or
Composite Video input
TV Co-Axle input
Remote control sensor
Version 1.00 02/2004
