Before use
Supply Voltage specifications
The Physilog 6S should be charged using USB at 5V, 100mA. For charging, the ambient
temperature must lie between 0°C and 30°C.
Power supply: 5V DC, 50/60Hz, 100mA
Please read carefully this quick start guide before use.
Physilog 6S should be handled carefully. In particular, it should not receive shocks, such as fall,
crushing, being hit etc. Do not press too hard on the on/off button, this can damage the button.
Warning: Do not use or charge the Physilog®6S if the sensor or its case is damaged. Contact Gait
Up about what further action is needed when the case is damaged. In case the battery is damaged,
immediately move the device away from flammable materials and contact Gait Up’s customer support.
The full instructions for use and specifications sheet is available on https://research.gaitup.com/support/.
Cleaning: Before you clean the device make sure it is turned off and dis-
connect all cables. Use water and soap, saline solution or 3% Hydrogen
peroxide (H2O2) solution to clean the Physilog 6S sensor device and its
fixation clip accessories. Do not use a cleaning spray, but carefully wipe
all parts using a humid wipe.
Storage: Store in a cool (0°C – 30°C) and dry place. The provided box is
the perfect place for your sensor. Keep away from direct sunlight.
Do not throw Physilog®6S sensors in the normal trash, dispose of it
properly considering local laws and rules about electronic waste and
batteries. Contact Gait Up’s customer support for more information
about elimination of Physilog®6S.
Maintenance and cleaning
Specifications
10D sensor
3D acceler3D gyroscope
3D magnetometer
Barometric sensor
Ergonomic design
Powerful multicolor LED & sound
5 color ring differentiators
Large single button
High-end connectivity
Bluetooth LE RF
USB-C for storage & charging
Software
- Free SDKs for accessing raw data and 3D angles
- Free companion App to sync, check battery and program sensors
- Free MATLAB routines to sync, stream, read, plot
- On-demand custom algorithm libraries and OEM/licencing
- Professional applications for Gait and Running
Accessories
-2 types of fixation clips
-USB-C <> USB cables
-Transport case
© 2021 Mindmaze SA & Gait Up SA. All Rights Reserved. MindMaze, Gait Up, the Mindmaze LOGO, the Gait Up LOGO and Physilog are trademarks or registered trademarks of
Mindmaze Holding SA.
