New
2”
BEAD BAZOOKA®
Gaither
‘
s BB3L2 / BB6L2 / BB10L2
GAITHER Page 7
Bead Bazooka
®
Care
For best performance, please add silicone oil or air tool oil
to the RAR Valve every 1~2 months
by performing the following steps:
1.Remove the barrel.
2.Push the piston down.
3.Apply silicone oil or air tool oil
to the upper part of the piston.
4.Apply the oil to the edge of the piston. ( Black O
-
Ring )
5.Press the piston repeatedly until the oil flow into the interior of valve.
Care and Maintenance :
˙
Indoor use only
˙
Avoid this product under the sun or heat exposure
˙
Often maintenance can increase the time usage of the
product
˙
Use often, please maintenance weekly
˙
In order to avoid parts damage, do not use this product
in the rain
˙
Recommend using silicone oil for maintaining piston,
in order to avoid damage to the parts.
WARNING:
●
COMPRESSED AIR IS DANGEROUS
-
ALWAYS WEAR EYE AND EAR PROTECTION. ALWAYS FOLLOW THE INSTRUCTIONS
GIVEN ABOVE.
●
THE BEAD BAZOOKA® IS A TOOL FOR THE TIRE INDUSTRY AND SHOULD NEVER BE USED OTHERWISE
.
●
The product should operate by professionals.
●
Never allow the nozzle to point in the direction of a person
●
Please vent the rest of air after use.
●
Do not try to disassemble or modify the product.
●
Please Keep away from children
Repair and Troubleshooting :
●
Read the instructions and check
BEAD BAZOOKA®
to see whether there are missing parts of damaged parts.
●
If the Bead Booster can not be used, please contact the store for repair.
