5. Enter ISP IP details under WAN Configuration.
Interface Type:
GajShield supports 3 types of network modes Standard, PPPoE Connection & DHCP.
i. Standard Mode
•
IP Address & Netmask
enter IP details provided by your ISP.
•
Next Hop IP
is ISP Gateway or router IP.
•
MTU (Maximum Transmission Unit)
Insert maximum packet size, in bytes, that can be sent through the interface.
ii.
PPPoE Connection
•
IP Address & Netmask
select (Static / Dynamic) depending on your ISP settings.
•
Next Hop IP
select (Static / Assigned by Remote) depending upon your ISP settings.
•
Access Concentrator
the PPPoE server name provided by the ISP.
•
Service Name
enter ISP name or details provided by service provider.
•
Username / Password
Insert username & password provided by ISP for PPPoE authentication.
GAJ
SHIELD
WAN Configuration
5
NOTE: We recommend that you use the default, 1500 bytes, unless your network equipment requires a different
packet size.
Note: Leave it empty if ISP does not provide a server name.
