TIG 3200 AC/DC
24
5.1.2. TIG DC PROCESS– STANDAR ARC.
This weld mode start and end is controlled by the torch pulsation system. (See Operation Mode for selection - Cycle
Parameters to display). Arc is standard DC.
KEY
ACTION
DESCRIPTION
P1
Back to Main Menu
P2
Access to Program File
P3
Access to Operation Mode
P4
Access to Cycle Parameters Accessing to specific cycle of selected mode.
E2
Modify Master Value
Set the welding strength.
THE EQUIPMENT WILL RECOMMEND THE USE OF A TUNGSTEN DIAMETER ACCORDING TO THE WELDING
INTENSITY. (SEE 3.4.3. REGULATION AREA).