gala gar 53100000, Technical Instruction Manual

GALA MIG (V. COMPACTA). Manuel d'Instructions

15 

Control pannels of GALA MIG (V. Compacta) equipment.  

B - Wire speed control potentiometer.  
C- SPOT TIME:  Welding time control potentiometer.   
D - Welding voltage selector switch. 
E- Fuse-holder. (1A/250V fuse) 
F- Thermal overload indicator.  
G- Luminous ON/OFF switch. 
R/S- Digital voltmeter-Ammeter. Measures the voltage and intensity 

of the welding circuit. (*) 

GALA MIG 1810 

WARNING!: This equipment has thermal protection against 

overheating. In the event that you exceed the duty cycle of the 

equipment, the light H will come on and the equipment will not be 

operative.  Wait until the equipment cools down appropriately. (Do not 

disconnect the machine). 

GALA MIG 2300 ALU 4R 

B - Wire speed control potentiometer.  
C- SPOT TIME:  Welding time control potentiometer.   
D - Welding voltage selector switch. 
E- Fuse-holder. (1A/250V fuse) 
G- Luminous ON/OFF switch. 
H- SOFT START:  Initial acceleration ramp control of driving motor. 

The abruptness of the start of the arc can be decreased with this, 

creating a progression of the motor speed.  
I- BURN-BACK:  Final wire length control.  It adjusts the final wire 

length at the outlet from the torch. 
R/S- Digital voltmeter-Ammeter. Measures the voltage and intensity 

of the welding circuit. (*) 

GALA MIG 2000/ 2600 

B - Wire speed control potentiometer.  
C- SPOT TIME:  Welding time control potentiometer.   
D - Welding voltage selector switch. 
E- Fuse-holder. (1A/250V fuse) 
G- Luminous ON/OFF switch. 
R/S- Digital voltmeter-Ammeter. Measures the voltage and intensity 

of the welding circuit. (*) 

GALA MIG 4000 

B - Wire speed control potentiometer.  
C- SPOT TIME:  Welding time control   potentiometer.   
D- Welding voltage fine adjustment changeover switch.  
E-   Fuse-holder. (1A/250V fuse) 
G- Scale switch.  ON/OFF switch.  
H- SOFT START:  Initial acceleration ramp  

control of driving 

motor. This permits  reducing abruptness of the arc start, 

creating a progression in the motor start-up speed.  

I-   BURN-BACK:  Final wire length control.  It  

adjusts the final 

wire length at the outlet  

from the torch. 

J-   ON indication lamp.  

R/S- Digital voltmeter-Ammeter. Measures the voltage and intensity 

of the welding circuit. (*) 

(*)Standard Models: Optional KIT Ref 43981075.             Included in GALAMIG V-I models 

A 

Torch connection. 

E 

T 1A/250V

Protection fuse. 

B 

Wire speed control. 

F 

Thermal overload warning light. (GALA MIG 
1810) 

C 

SPOT TIME.  Spot time. 

H 

SOFT-START:  Soft control on initial arc 
striking. 

M 

Welding earth connection. 

I 

BURN-BACK:  Final wire length control. 

C 

B 

D 

F 

G 

E 

R 

S 

C 

B 

I 

H 

G 

D 

E 

R 

S 

C 

B 

G 

D 

E 

R 

S 

R 

S 

D 

J 

G 

E 

C 

B 

I 

H