25/86
Gala Gar, S.L. c/ Jaime Ferrán, 19 (Políg. Cogullada) | Tel.: (+34) 976 47 34 10 - 50014 ZARAGOZA |
SMART 210 TIG PULSE
Advanced digital control
This machine adopts advanced MUC intelligent digital control technology, and all its major parts are performed
through software. It is a digital control welding machine, improved a lot in its function and performance when
compared with the traditional welding machine.
Advanced IGBT inverter technology
This machine adopts advanced IGBT inverter technology. The inverting frequency is 36~43KHz, which greatly
reduces the volume and weight of the welder. Great reduction in magnetic and resistance loss obviously enhances
the welding efficiency and energy saving effect. Beside, the noise pollution is almost eliminated, since the working
frequency is beyond audiorange.
Perfect auto-protection function
Perfect automatic protection function is available for this machine. When the mains voltage fluctuates greatly,
welding will stop automatically, and the error information will be displayed. After the mains voltage becomes stable,
welding will recover automatically. When overcurrent or overheating occurs, the machine will also stop working
automatically with the error information displayed. Such comprehensive protection function greatly improves the
lifespan of the machine.
Good consistency and stable performance
This machine adopts intelligent digital control, so it is insensitive to the change of parameters of components. That is,
the performance of welding machine will not be affected by the change of the parameters of certain components.
Besides, it is insensitive to the change of the working environment such as temperature and humidity, etc. Therefore,
the consistency and stability of digital control welder is better than that of traditional welder.
Parameter easy to adjust and software easy to update
Generally speaking, for a welding machine with analogue circuit control or with analogue circuit & digital circuit
control, the adjustment of most parameters should be achieved through the corresponding circuit, so if more
parameters to be adjusted, the circuit would be more complicated and more difficult to be achieved. However, for a
welding machine with intelligent digital control, the adjustment of parameters is much easier and more accurate,
because its main function is achieved through software. To change the function or some of the parameters, you do
not need to change the circuit, and the only thing you have to do is to download the updated software.
User-friendly interface
This machine adopts international standard graphic language interface, which is simple, vivid, intelligible, and
convenient for users’ operation.
Voice prompt (customized)
This machine adopts user interface with voice prompt, which make the operator feel friendlier. Users can get voice
prompts for every operating step.
High-quality MMA welding
MMA welding performance is significantly improved with excellent control algorithm: easier to ignite arc, stable
welding current, little spatter, no electrode sticking, good shaping, and automatically adaptable to the change of
length or section of welding cable.
Remote control available (customized)
The machine offers two remote control modes, namely torch control mode and foot control mode, which can meet
different application requirements of users.
Perfect automatic recording function
All data such as cumulative startup times, cumulative running time, cumulative welding time, cumulative TIG welding
time, accumulative MMA welding time, cumulative times of alarm, cumulative times of overcurrent, cumulative times
of overheating and cumulative times of under-voltage can be calculated and stored in FLASH memory. And also,
these data can be obtained through digital display.
Wide input voltage range adaptable
Welding can be carried out under AC 150~265V with this machine. The machine is suitable for welding in most
industrial situations for its wide input voltage range.
