26/86
Gala Gar, S.L. c/ Jaime Ferrán, 19 (Políg. Cogullada) | Tel.: (+34) 976 47 34 10 - 50014 ZARAGOZA |
SMART 210 TIG PULSE
3. MAIN PARAMETER.
Technical Parameter
Unit
Model
TIG200P (W212)
Rated input voltage
V
AC230V±15%; 50/60HZ
Rated input power
MMA
KVA
8.2
TIG
6.0
Welding current range
MMA
A
10~180
V
20.4~27.2
TIG
A
10~200
V
10.4~18
Rated duty cycle
①
%
35
No-load voltage
MMA
V
65
TIG
65
Downslope time
s
0~10
Post-flow time
s
0~15
Overall efficiency
%
85
Housing protection grade
IP
21S
Power factor
cosφ
0.7
Insulation grade
F
Arc ignition mode
HF arc ignition
Standard
IEC60974-1
Noise
db
＜
70
Size
without handle
mm
365*135*235
with handle
②
365*135*277
Weight
kg
6.125
“
①
”- under the environment temperature of 40
℃
“
②
”- Not every piece of machine has the same design. Differences may exist upon customers’ requirements.
Parameters of welding torch
Model
WP-26K-E
Maximum current
200A
Rated current
160A
Cooling mode
Air cooling
Gas connector
M10×1.0
Rated duty cycle
40%
Parameter autosaving
The parameters having been adjusted will be autosaved in the parameter group currently used (no autosaving will
be done in the case that no operation is done after parameters are adjusted and the machine was turned off in
5s’ time). When the machine is turned on next time, the parameters in this parameter group are just the
parameters used last time. When the welding mode and operation mode are reselected, autosaving will be done
in 10s. No special save key and manual saving operation is available for this machine.
